Thermo Scientific
On demand
Thermo Scientific Heratherm Incubation Chamber 750L 100-240V 50-60Hz, one model. An incubator holds a temperature steadily for days, which is a different proble
EIS750
Thermo Scientific Heratherm Incubation Chamber 750L 100-240V 50-60Hz. An incubator holds a temperature steadily for days, which is a different problem from reaching one.
Cultures respond to the temperature they sit in for days, so what matters is that every position in the chamber holds the same value overnight and through a power blip — not how fast the chamber reaches set point. A door opened for thirty seconds should not cost an hour of recovery, and a shelf near the fan should not run a degree warmer than the one below it.
An ordinary incubator can only heat, so it cannot hold a temperature below the room. In a tropical laboratory that rules out a great deal: BOD at 20 °C, many environmental protocols and any cool storage need a refrigerated incubator, which both heats and cools. Specifying a heat-only unit for a 20 °C protocol is the most expensive mistake in this category.
Put an independent thermometer in the chamber and read it: the controller reports its own sensor, which is one point in a box that may not be uniform.
Supplied in one model.